350-401 ENCOR Dumps Refresh | Assistance With Your Certification Exam

350-401 ENCOR Dumps Refresh

It is precise because of the popularity of the 350-401 exam that the competition for the exam is fierce. You will need 350-401 ENCOR dumps to assist you in passing the exam.

Pass4itSure refreshes the 350-401 ENCOR dumps https://www.pass4itsure.com/350-401.html to help you clear the exam with a new 1051 answer (PDF+VCE).

The Cisco CCNP 350-401 ENCOR exam is unique

When it comes to IT certification, one of the most famous names is Cisco. The Cisco CCNP 350-401 ENCOR certification is particularly special. The Cisco 350-401 is associated with four certifications. If you successfully pass the 350-401 exam, you will receive Cisco Certified Professional – Enterprise Core.

Not only that, but successful completion of the exam also earns additional technical certifications. (350-401 is also a qualification test for CCIE Enterprise Wireless and CCIE Enterprise Infrastructure certifications)

350-401 exam change your career

As mentioned above, passing the 350-401 ENCOR exam brings not only one certification, it is also related to other certifications. This means opening up a variety of career benefits, from professional recognition to salary upgrades.

More importantly, successfully passing the exam can increase self-confidence. This is something that no amount of money can buy.

Next, bring some free 350-401 exam questions.

CCNP 350-401 ENCOR Practice Questions 2023

The 350-401 ENCOR exam has several 100 questions and a duration of 120 minutes. In addition, there are two languages to choose from – English and Japanese. The price is $400, including tax.

Question 1:

Which level message does the WLC send to the Syslog server?

A. syslog level errors and fewer severity messages

B. syslog level errors messages

C. all syslog levels messages

D. syslog level errors and greater severity messages

Correct Answer: D

Question 2:

While configuring an IOS router for HSRP with a virtual IP of, an engineer sees this log message.

Jan 1 12:12:12.111 : %HSRP-4-DIFFVIP1: GigabitEthernet0/0 Grp 1 active routers virtual IP address is different to the locally configured address

Which configuration change must the engineer make?

A. Change the HSRP group configuration on the remote router to 1.

B. Change the HSRP group configuration on the local router to 1.

C. Change the HSRP virtual address on the remote router to

D. Change the HSRP virtual address on the local router to

Correct Answer: D

Syslog points to the local router having VIP ip, and the remote router in the g0/0 interface having We want the latter for all routers in HSRP so we need to configure a local router, hence B. “is different to the locally configured…”

Question 3:

What is one primary REST security design principle?

A. fail-safe defaults

B. password hash

C. adding a timestamp in requests

D. OAuth

Correct Answer: A

Question 4:

Which Cisco SD-WAN component acts as a single pane of glass for management and offers centralized fault, performance, accounting, and configuration management?

A. vBond

B. vEdge

C. vSmart

D. vManage

Correct Answer: D

Question 5:

How do cloud deployments differ from on-prem deployments?

A. Cloud deployments require longer implementation times than on-premises deployments

B. Cloud deployments are more customizable than on-premises deployments.

C. Cloud deployments require less frequent upgrades than on-premises deployments.

D. Cloud deployments have lower upfront costs than on-premises deployments.

Correct Answer: D

Question 6:

Refer to the exhibit.

flow monitor FLOW-MONITOR-1 record netflow ipv6 original-input exit

! sampler SAMPLER-1mode deterministic 1 out-of 2 exit

! ip cefipv6 cef! interface GigabieEthernet 0/0/0

ipv6 address 2001:DB8:2ABCD::2/48

ipv6 flow monitor FLOW-MONITOR-1 sampler SAMPLER-1 input

What is the effect of introducing the sampler feature into the Flexible NetFlow configuration on the router?

A. NetFlow updates to the collector are sent 50% less frequently.

B. Every second IPv4 packet is forwarded to the collector for inspection.

C. CPU and memory utilization are reduced when compared with what is required for full NetFlow.

D. The resolution of sampling data increases, but it requires more performance from the router.

Correct Answer: C

it\’s about what record the router is analyzing and not about what is been sent to the collector.

Question 7:

How is MSDP used to interconnect multiple PIM-SM domains?

A. MSDP depends on BGP or multiprotocol BGP for inter-domain operation.

B. MSDP SA request messages are used to request a list of active sources for a specific group.

C. MSDP allows a rendezvous point to dynamically discover active sources outside of its domain.

D. MSDP messages are used to advertise active sources in a domain.

Correct Answer: B

SA request messages are used to request a list of active sources for a specific group. These messages are sent to an MSDP SA cache that maintains a list of active (S, G) pairs in its SA cache -> Answer C is correct.

SA response messages are sent by the MSDP peer in response to an SA request message. SA response messages contain the IP address of the originating RP and one or more (S, G) pairs of the active sources in the originating RP\’s domain that are stored in the cache ->

Answer D is not correct as it should be “SA response messages are used to advertise active sources in a domain” (not MSDP messages).

Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16/imc-pim-xe-16-book/imc-msdp-im-pim-sim.html

Question 8:

An engineer connects two switches and notices that the connected interface on one of the switches is in an err-disabled state. The engineer then notices that BPDUGuard is enabled on the interface. How would you correct this?

A. Switch(config)# interface x/x Switch(config-if)# no spanning-tree bpduguard enable Switch(config-if)# shut Switch(config-if)# no shut

B. PlaceHolder

C. PlaceHolder

D. PlaceHolder

Correct Answer: A

Question 9:

What are two common sources of interface for WI-FI networks? (Choose two.)

A. radar

B. LED lights

C. rogue AP

D. conventional oven

E. fire alarm

Correct Answer: AC

It includes many different types of radio communication, such as low-frequency radio, AM radio, shortwave radio, television, FM radio, microwave, and radar.

The microwave category also contains the two main frequency ranges that are used for wireless LAN communication: 2.4 and 5 GHz.

Question 10:

Which activity requires access to Cisco DNA Center CLI?

A. provisioning a wireless LAN controller

B. creating a configuration template

C. upgrading the Cisco DNA Center software

D. graceful shutdown of Cisco DNA Center

Correct Answer: D

Question 11:

What is the purpose of the weight attribute in an EID-to-RLOC mapping?

A. It determines the administrative distance of LISP-generated routes in the RIB.

B. It indicates the load-balancing ratio between ETRs of the same priority.

C. It indicates the preference for using LISP over native IP connectivity.

D. It identifies the preferred RLOC address family.

Correct Answer: B

Question 12:


Drag and drop the characteristics from the left onto the routing protocol types on the right.

Select and Place:

ccnp 350-401 practice questions 12

Correct Answer:

ccnp 350-401 practice questions 12-2

Question 13:

How does Cisco Express Forwarding switching differ from process switching on Cisco devices?

A. Cisco Express Forwarding switching uses adjacency tables built by the CDP protocol, and process switching uses the routing table.

B. Cisco Express Forwarding switching uses dedicated hardware processors, and process switching uses the main processor.

C. Cisco Express Forwarding switching saves memory by storing adjacency tables in dedicated memory on the line cards, and process switching stores all tables in the main memory.

D. Cisco Express Forwarding switching uses a proprietary protocol based on IS-IS for MAC address lookup, and process switching uses the MAC address table.

Correct Answer: C

Question 14:

Which two statements about EIGRP load balancing are true? (Choose two)

A. Cisco Express Forwarding is required to load-balance across interfaces

B. A path can be used for load balancing only if it is a feasible successor

C. EIGRP supports unequal-cost paths by default

D. Any path in the EIGRP topology table can be used for unequal-cost load balancing

E. EIGRP supports 6 unequal-cost paths

Correct Answer: BE

EIGRP provides a mechanism to load balance over unequal cost paths (called unequal cost load balancing) through the “variance” command. In other words, EIGRP will install all paths with metric < variance * best metric into the local routing table, provided that it meets the feasibility condition to prevent routing loops.

The path that meets this requirement is called a feasible successor. If a path is not a feasible successor, it is not used in load balancing. Note: The feasibility condition states that the Advertised Distance (AD) of a route must be lower than the feasible distance of the current successor route.

Question 15:

Refer to the exhibit.

ccnp 350-401 practice questions 15

The traceroute fails from R1 to R3.

What is the cause of the failure?

A. The loopback on R3 Is in a shutdown state.

B. An ACL applied Inbound on loopback0 of R2 Is dropping the traffic.

C. An ACL applied Inbound on fa0/1 of R3 is dropping the traffic.

D. Redistribution of connected routes into OSPF is not configured.

Correct Answer: C

We see in the traceroute result in the packet could reach (on R2) but it could not go any further so we can deduce an ACL on R3 was blocking it.

Note: The record option displays the address(es) of the hops (up to nine) the packet goes through.

To facilitate learning, it can also be downloaded in 350-401 PDF format: https://drive.google.com/file/d/1vd0-M9gbSw691vc5eBP_QxWBmCHD0xju/view?usp=share_link


The Pass4itSure 350-401 ENCOR dumps are a huge help for people who want to pass the exam. So, if you plan to move to the next level of your career, download the latest 350-401 ENCOR dumps at https://www.pass4itsure.com/350-401.html and pass the exam with ease.