352-001 dumps provided by Pass4itsure are tested through practice, and are the most correct and the newest practical 352-001 Exam Prep. Our Pass4itsure can provide accurate 352-001 exam based on extensive research and the experience of real world to make you pass 352-001 exam in a short time. If you purchase our 352-001 dumps, we will offer free update service within one year.
Are you still searching for Cisco 352-001 dumps ? Don’t be silly, 352-001 dumps only complicate your goal to pass your Cisco 352-001 quiz, in fact the Cisco 352-001 dumps could actually ruin your reputation and credit you as a fraud. That’s correct, the Cisco 352-001 cost for literally cheating on your Cisco 352-001 dumps materials is loss of reputation. Which is why you should certainly train with the 352-001 practice exams only available through Pass4itsure.
CCDE 352-001 Dumps Design Written Exam
352-001 Dumps CCDE
120 minutes (90 – 110 questions)
Read current policies and requirements
Review type of exam questions
★2017 Cisco 352-001 Dumps (#9-18) from Pass4itsure★:
QUESTION 9 A service provider has a Resilient Ethernet Protocol ring running as a metro backbone between its locations in one city. A customer wants to connect one site with
one box redundant to the Resilient Ethernet Protocol ring at two different service provider locations. How can this be done without producing any Layer 2 loops
within the network design?
A. Spanning tree at the service provider side only must be enabled.
B. Spanning tree at the customer side only must be enabled.
C. Flex Links at the service provider side only must be enabled.
D. Flex Links at the customer side only must be enabled.
E. EtherChannel at the service provider side and the customer side must be enabled.
F. Spanning tree at the service provider side and the customer side must be enabled.
G. Flex Links at the service provider side and the customer side must be enabled. Correct Answer: D
Your company designed a network to allow server VLANs in a data center to span all access switches. In the design, Layer 3 VLAN interfaces and HSRP areconfigured on the aggregation switches. In which three ways should the design of the STP domain be optimized for server and application performance? (Choose
A. Use loop guard on access ports.
B. Use PortFast on access ports.
C. Use root guard on access ports.
D. Align Layer 2 and Layer 3 forwarding paths.
E. Use BPDU Skew Detection on access ports.
F. Explicitly determine root and backup root bridges.
Correct Answer: BDF
You have created a network design that has two point-to-point Metro Ethernet circuits extending a single production VLAN between two data centers. Under
normal circumstances, one circuit will carry traffic and spanning tree will block the other. If the company wants you to make use of both circuits to carry production
traffic, which two technologies and features will you investigate to integrate into your network design? (Choose two.)
C. Multichassis EtherChannel
Correct Answer: AC
Voice traffic between two campus enterprise networks is growing. The network designers decide to add a second 10-Mb Metro Ethernet service parallel to their
original 10-Mb service in order to provide more bandwidth and diversity. The QoS profile will be the same on the new 10-Mb service due to the voice stability on
the first Metro Ethernet link. When the second link is added to the OSPF domain, which traffic design consideration would have the most impact on the voice traffic
when both links are active?
A. per-destination IP address basis
B. per-flow basis
C. per-packet basis
D. per-source IP address basis
Correct Answer: C
You work as a network designer for a company that is replacing their Frame Relay WAN with an MPLS VPN service, where the PE-to-CE routing protocol is BGP.
The company has 3000 routes in their distribution routers, and they would like to advertise their access routers through the MPLS network. Their service provider,
however, only supports 1000 prefixes per VRF. Which two design solutions can be applied to ensure that your access routers will be able to reach all devices in
your network? (Choose two.)
A. Use prefix lists on your distribution routers to control which routes are sent to the MPLS network.
B. On your distribution routers, configure null routes and aggregate routes for the prefixes in your network.
C. Configure your distribution routers to send a default route to the MPLS network.
D. Summarize the routes on the MPLS WAN interfaces of your distribution routers.
Correct Answer: BC
You are designing a network that will run EIGRP over a Metro Ethernet service that does not employ a link-loss technology. What will be the impact on
convergence if there is a break in the end-to-end Layer 2 connectivity within the service provider network?
A. The routers will immediately lose their adjacencies and converge.
B. The routing protocol will not converge until the hold timers have expired.
C. The switch ports connected to the router will go down and the routers will immediately converge.
D. The VLAN on the switches will go inactive, the ports associated on the switch will go down, and the routers will immediately converge.
Correct Answer: B
Refer to the 352-001 dumps exhibit.
Acme Corporation hired you as a network designer to upgrade their network so that it supports IPv4 and IPv6 multicast. Which two protocols are needed on the
LAN switch? (Choose two.)
A. PIM sparse mode
B. IGMP snooping
C. PIM snooping
D. Source Specific Multicast
E. MLD snooping
Correct Answer: BE
A new video multicast application is deployed in the network. The application team wants to use the 22.214.171.124 multicast group to stream the video to users. They
want to know if this choice will impact the existing multicast design. What impact will their choice have on the existing multicast design?
A. Because 126.96.36.199 is a private multicast range, a flood of PIM packets that have to be processed by the CPU and hosts will be sent by the routers in the
B. Because 188.8.131.52 is a private multicast range, the rendezvous point has to send out constant group updates that will have to be processed by the CPU and
C. The multicast application sends too many packets into the network and the network infrastructure drops packets.
D. The 184.108.40.206 group address maps to a system MAC address, and all multicast traffic will have to be sent to the CPU and flooded out all ports.
Correct Answer: D
A customer is using a service provider to provide a WAN backbone for a 30-site network. In establishing the network, the customer must work within these
The customer has a self-managed MPLS backbone.
The VPLS WAN backbone of the service provider does not support PIM snooping.
Multicast VPN must be used for multicast support inside some VRFs.
What can the customer do so that multicast traffic is NOT flooded to all sites?
A. Configure static GRE tunnels and run the MPLS and multicast VPN inside these GRE tunnels.
B. Use Label Switched Multicast for the multicast transport.
C. Use PIM-SSM as the multicast routing protocol with IETF Rosen Draft multicast VPN.
D. Configure a static mapping between multicast addresses and MAC addresses.
E. Use GET VPN to encrypt the multicast packets inside the WAN.
Correct Answer: A
What are two design advantages to using virtual port channel? (Choose two.)
A. enhanced system availability through multiple systems
B. reduced Spanning Tree Protocol convergence time
C. loop management without use of Spanning Tree Protocol
D. ability to use Spanning Tree Protocol blocked ports to forward traffic
E. enhanced ability to recover from Spanning Tree Protocol changes
Correct Answer: AC
If you choose the help of Pass4itsure, we will spare no effort to help you pass the exam. Moreover, we also provide you with a year of free after-sales service to update the exam practice questions and answers. Do not hesitate! Please select Pass4itsure, it will be the best guarantee for you to pass 352-001 dumps.
To keep constantly update can be walk in front, which is also our Pass4itsure’s idea. Therefore, we regularly check 352-001 dumps to find whether has update or not. Once the update comes out, we will inform our customers who are using our products so that they can have a latest understanding of 352-001 dumps. All the update service is free during one year after you purchased our 352-001 dumps software.Now please add Pass4itsure to your shopping cart.